Mark Levinson RS-232 - Manual (Page 7)

7
GI2 Go to input 2
GI3 Go to input 3
GI4 Go to input 4
GI5 Go to input 5
GI6 Go to input 6
GI7 Go to input 7
Note: “ GI7 ” selects either input 7 or phono input if installed.
GBA Go to balance mode
GBE Exit balance mode
IOF Go to display intensity 0
I25 Go to display intensity 25%
I50 Go to display intensity 50%
IFU Go to display intensity 100%
Status:
COMMAND DESCRIPTION
MON Enable RS232 status updates
(default)
MOF Disable RS232 status updates
Note: The monitor on/off setting is not saved
and restored through power off->on cycles
Volume direct:
COMMAND DESCRIPTION
Vxx.x Set volume level directly
Note: Rounds to nearest whole dB step for volumes less that
23.0
Example: V65.0 (sets No320S volume to 65.5)
Query:
COMMAND DESCRIPTION
QAL Request entire current No320S status
Note: Sends all 6 status lines shown below regardless of
monitor on/off