Metz TG 73 - 100 MT - Manual (Page 41)

41
11. Special picture effects
Still picture
The current frame is „frozen“ on the screen
when you press the II key. The TV programme (or
the video film) continues to run in the backgro-
und.
Pressing the II key again switches back to the
current programme (or video film).
1. Activate the still picture
function
Press this key on the remote
control....
The screen displays Explanation
2. Deactivate the still picture
function
II
II
12. Operation without remote control
Programme selection:
Press the - + keys.
Volume:
Hold down the preselect key F until the bar display for the volu-
me appears on the screen. Now press the - + keys to adjust the
volume.
Contrast:
Hold down the preselect key F until the bar display for contrast
appears on the screen. Then press the - + keys to adjust the
contrast.
This mode is only intended for an emergency when the battery in
the remote control handset is flat, or if the remote control is not
available.
The TV controls are underneath a cover at the front of the set.
You can control the following functions on the TV without the
remote control handset. The function remains preselected for 10
seconds.