MACKIE 2-Way High-Definition Powered Loudspeaker HD1221 - Manual (Page 7)

Rear Panel Features
1. MAIN INPUT
This is a female XLR-type connector that accepts
a balanced line-level signal from a mixing console or
other signal source. See Appendix B for more
information about this connector.
2. LOOP OUT
This is a male XLR-type connector that produces
exactly the same signal that is connected to the main
input jack. Use it to daisy-chain several HD1221's
together off the same signal source. See Appendix B for
more information about this connector.
3. VOICING MODE
This built-in 3-position voicing mode switch allows the
HD1221 to be tailored for any sound application.
CONTOUR
Set the Voicing Mode switch to the ‘CONTOUR’
position for low-level applications. This is the
perfect setting when a little more low and high
end is necessary. The LED next to the switch
will illuminate yellow when ‘CONTOUR’ is the
chosen voicing mode.
NORMAL
This is the standard position of the switch,
hence the name, ‘NORMAL’. It is ideal for most
PA applications where the HD1221 will be
cranked. Additionally, this is the recommended
position when paired with a subwoofer. Of the
three options, this is the most accurate voicing
mode and should be used in the majority of
applications. The LED next to the switch will
illuminate green when ‘NORMAL’ is the chosen
voicing mode.
MONITOR
The ‘MONITOR’ position is designed for when
the HD1221 will be used as a stage monitor,
but it may also be utilized when you need the
vocals to cut through a high-gain, high-output
instrument (such as guitar). In this position,
the low frequency is rolled off, while the
mids and highs are tuned to cut through stage
volume with as much gain before feedback
as possible. The LED next to the switch will
illuminate red when ‘MONITOR’ is the chosen
voicing mode.
POWER
LIGHT ON
SIG/ LIMIT
THERMAL
MAIN
INPUT
LOOP
OUT
LEVEL
+ 6dB 6dB -
HD1221
2-WAY HIGH DEFINITION POWERED LOUDSPEAKER
VOICING MODE
NORMAL
CONTOUR
MONITOR
POWER
ON
REVISION SERIAL NUMBER
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR
MOISTURE. DO NOT REMOVE COVER. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
AVIS: RISQUE DE CHOC ELECTRIQUE — NE PAS OUVRIR
PARALLEL
7
Owner’s Manual
Owner’
s Manual
1 2 3 4
8
9
5
6
7