Philips Magnavox CCZ252AT - Manual (Page 22)

22 Remote Control Buttons
POWER Button
Press to turn on or off the TV/VCR.
SPEED Button
Press to select the recording speed (SP, LP, or SLP).
PLAY/ ▲ Button
Press to play a tape. Details are on page 28. Also, press to release
Search or Still mode and return to normal playback. Details are
on page 46. Press to select an item in the pop up menu.
REW(ind)/s Button
When tape playback is stopped, press to rewind the tape at
high speed. During tape playback, press to rewind the tape
while the picture stays on-screen. Details are on page 46.
Press to change a setting of a pop up menu item or to adjust
the picture controls. Details are on pages 24 - 25.
REC(ord)/OTR Button
Press once to start a recording. Details are on page 29. Or,
press repeatedly to start a One-Touch Recording (an immediate
timed recording, 30 minutes to eight hours long) of the channel
you are watching. Details are on page 30.
STATUS/EXIT Button
Press to see the status display. Press again to remove the status
display. Details are on page 26.
Press to exit the on-screen menu.
Number Buttons
Use to select channels and to program TV/VCR functions (such
as setting the clock).
● Channels 1 - 9
To select, press 0, then press the channel you want to select.
For example, to select channel 7, press 0, 7.
● Channels 100 and above
To select, press the +100 button, then press the last two digits
of the channel you want. For example, to select channel 117,
press the +100 button, 1, 7.
SLEEP Button
Press to set the sleep timer. Details are on page 37.
REW
PLAY
POWER
SPEED
MUTE
SLEEP
ALT.CH
CHANNEL
VOLUME
REC/OTR
STATUS/EXIT
MEMORY PAUSE/STILL
MENU CLEAR
TRACKING
STOP
F.FWD
o
o
p
p
o
p
o
p
1 2 3
4 5 6
7 8 9
0 +100
MENU Button
Press to display the pop up menu. You may also use the buttons
on the front panel of the TV/VCR to access the pop up menu.
Details are on page 20.
CCZ252comb.QX33 4/6/99 8:50 PM Page 22