Multiquip Rammax Tandem Vibratory Roller T16 - Manual (Page 30)

PAGE 30 — TANDEM ROLLER: T16 — PARTS & OPERATION MANUAL — REV. #2 (03/12/01)
All values stated are valid at:
■
Hydraulic oil temperature of approx. 140° F and high idle
(full RPM) of Diesel engine
■
Relief valves should relase pressure for max. 5 seconds.
Pressure gauge measuring range:
M1 ....................................................... 900PSI
M2, M3, M4, M5 ................................... 9000PSI
M1 Charge pressure for drive pump at speed of approx. 2 Mph
■
260 ± 30 PSI (cannot be adjusted)
M1 Pressure of drive circuit forward with blocked drum
■
4350 PSI plus charge pressure = 4610 ± 220PSI
CHECK AND ADJUST PRESSURES