General layout – Multiquip Rammax Tandem Vibratory Roller T16 User Manual
Page 16
PAGE 16 — TANDEM ROLLER: T16 — PARTS & OPERATION MANUAL — REV. #2 (03/12/01)
Frost warning
In the event of frost warning completely empty sprinkling
system and take the screen filter (2a) out of the filter housing.
1. Take off filter housing.
2. Drain water
3. Switch sprinkler system on to drain remaining water
from the tubes.
GENERAL LAYOUT
1. Cleaning
If necessary, clean water tank (1a), filter (2a) and sprinkler
tubes (3a) front and rear.
2a
3a
1a
3a
The toolbox is located on the R.H. side, close to the articulation
joint. The toolbox of the K-Version is located under the engine
hood. The tank for the tire lubrication is located on the right side,
close to the articulation joint.
Before opening the toolbox always first put the articulation lock
in place.
SCRAPERS
1 Wheel
Lightly tighten scraper for the roller by hand.
2 Tyres
Fill scraper for the tyres with a clearance of 3-5mm.