Master Lock E72 - Manual (Page 5)

Function 03 Add Group Schedule
Page vii
Day Code
Sample Function Programming Page
Valid User Code
Function 03 Group Schedule
Level: Master
Function schedules OPEN and CLOSE time/day for an established GROUP of
users. This function differs from the Basic Schedule (Func. 02), in that
specific GROUPS can be granted access.
(Military) Hours Minutes
Open Time
Close Time
Function Number
*
Mgmt. Defined
(Military) Hours Minutes
ENTRIES VISUAL / AUDIO
Day Code Must be entered as a 2 digit code.
01-07 Individual Days (Ex: Monday = 01)
08 Weekdays - Monday through Friday
09 Weekends - Saturday & Sunday
10 Even Weekdays - Tuesday & Thursday
11 Odd Weekdays - Monday, Wednesday & Friday
12 Override Pre-Programmed Holidays
13 All Days
Note
To DELETE ALL GROUP SCHEDULES, enter “0” in place of the DAY CODE then EXIT “*”.
For MANAGEMENT GROUPS (02-09) Group Schedule CANNOT be employed.
For USER GROUPS (10-99) Group Schedule CAN be employed.
ENTER “#” to RETURN to FUNCTION NUMBER and continue programming.
3 *
*
0
*
* 8
1 2 Group
#
See Note
Exit *
07 00
17 00
0
Function Name
Function Description
LED /Audio Entry
Confirmation
G= Green
Y= Yellow
R= Red
Grey boxes are for
entering required
information
Function Number
Minimum Group
Security Level
Needed To
Program Function
1. Enter your
UID and PIN.
2. Enter
Function Number.
3. Enter Day
Code from list
below.
4. Enter
appropriate
Group Number.
5. Enter Open
Time.
6. Enter Close
Time.
Day Code
Note
Information
7. Enter * to exit
or to continue
programming,
enter # and return
to Function
Number. (Step 2)
White boxes are for
entering variable
information.
See Day Code Mgmt. Defined
STEPS
IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.
Factory Code 9991234
Lock ID
User Defined 6 Digits
Level: Master
The LOCK ID INITIALIZATION process can be implemented ONLY using the FACTORY CODE.
This occurs when:
• The lock is first installed
• After the lock has been reset. (See page v.)
Initialize Lock ID
Page 1
IF ERROR ON ENTRY OR NO ENTRY IN 5 SECONDS, LOCK WILL TIME-OUT. BEGIN AT STEP 1.
#
ENTRIES VISUAL / AUDIO
#
Note
The default LOCK IDENTIFICATION NUMBER for this function is 000001.
Use “0” to indicate blanks. (Ex. Room 321=321000 or 000321).
We recommend that each lock be given a unique ID Number.
In order to add the ID Number later, the lock must be fully reset.
1.
2.