Mitel 4150 - Manual (Page 20)

-15-
Call Forward (Enhanced)
Call Forward lets you redirect incoming calls to an alternate number. Busy
(Internal and External) redirects your calls when your telephone is busy. No
Answer (Internal and External) redirects your calls after several rings if you
don't answer. Busy/No Answer (Internal and External) redirects your calls
when your telephone is busy or if you don't answer. Always redirects all
incoming calls regardless of the state of your telephone.
Note: For information about using the To Me softkey, see Call Forward -
Remote.
To program Call Forward:
1. Press SUPERKEY.
2. Press the More softkey until the Forwarding softkey appears.
3. Press the Forwarding softkey.
4. Press the softkey that corresponds to the type of call forwarding you
want to program.
5. Press either the Internal or External softkey.
6. Dial the destination number.
The Current No. softkey restores the previously programmed
destination if available. The Delete softkey (if available) turns off the
forwarding and deletes the destination.
7. Do one of the following:
„
To save and turn forwarding on, press the Save/On softkey.
„
To save and leave forwarding off, press the Save/Off softkey.
8. Continue programming other types of Call Forward or press SUPERKEY
to leave programming mode.
To turn all types of Call Forward on and off once programmed (if
available):
1. Press the Forwarding softkey.
2. Press the Turn FWD On or Turn FWD Off softkey.