Marantz VP-12S1s - Manual (Page 23)

19
OPERATIONS
ENGLISH
Select 12V DC or 0V from on and off at each aspect mode.
Full, Normal, Zoom, and Through.
On: Output DC 12V.
Off: No output.
This allows such as a powered dual aspect screen according
to the aspect mode.
Picture Adjust
Setting
Display
Config Full
Normal
Through
Zoom Off
Off
Off
Off
Trigger 2
Memory
Trigger2
– Reset Lamp Life
When replace the lamp unit, before the Lamp Life becomes
"0" hours need to reset lamp life.
When the user selects “Yes”, the following message appears:
Again, select “Yes”, and press the ENTER key. Then the
lamp life is initialized.
– Reset All
All settings goes to the factory default settings except the
lamp life.
When the user selects “Yes”, the following message appears:
Again, select “Yes”, and press the ENTER key.
Reset All ?
Yes No
Reset Lamp Life ?
Yes No
Recall the stored memory for preference. The unit has three
picture modes: THEATER, STANDARD, and DYNAMIC.
Each picture mode has three picture memories.
– Store memory
Select Memory mode from THEATER, STANDARD, or
DYNAMIC using the Remote Controller or in the above menu.
Display Picture Adjust menu. Adjust any items, and these
figures are automatically stored.
Picture Adjust
Setting Mode Standard
1
Display
Config
Trigger 2
Memory
Memory