Makita LS711D - Manual (Page 2)

2
SPECIFICATIONS
Blade diameter ........................................................................................... 190 mm (7-1/2”)
Hole (arbor) diameter ................................................................................. 15.88 mm (5/8”)
Max. Miter angle ......................................................................................Left 47°, Right 57°
Max. Bevel angle ......................................................................................................Left 45°
Max. Cutting capacities (H x W) with blade 190 mm (7-1/2”) in diameter.
(Note)
The max. Cutting capacities may vary according to workpiece, blade and/or charging
condition.
No load speed (RPM) .......................................................................................... 2,000/min.
Dimensions (L x W x H) ..................550 mm x 430 mm x 454 mm (21-5/8” x 17” x 17-7/8”)
Net weight ................................................................................................. 10.5 kg (23.1 lbs)
• Manufacturer reserves the right to change specifications without notice.
• Specifications may differ from country to country.
Miter angle
Bevel angle
0° 45° (left)
0°
50 mm x 182 mm
(2” x 7-1/8”)
35 mm x 182 mm
(1-3/8” x 7-1/8”)
45° (left and right)
50 mm x 127 mm
(2” x 5”)
35 mm x 127 mm
(1-3/8” x 5”)
Battery Charger DC1804
Input A.C. only 50 Hz-60 Hz
Output D.C. 7.2 V-18 V
Battery Cartridge 1822 1833 1834 1835
Voltage 18 V
Charging time 45 min. 50 min. 60 min. 70 min.