Moxa Technologies C168P - Manual (Page 24)

3-2 C168P User’s Manual
Installing Driver
Following is the procedure for installing the C168P driver for the first time under
Windows NT 4.0.
Note !
Make sure the board(s) has(have) already been plugged in the system
slot(s) if you are doing quick installation.
1. Please log in NT as Administrator.
2. Open the [Control Panel], click on the [Network] icon and select the
[Adapters] tab.
3. Click on the [Add] button, then the [Have Disk...] button in “Select Network
Adapter”.
4. Specify the exact path of the driver diskette, A:\WINDOWS.NT. Then click
[OK].