Maytag MAF9601 User Manual

Page 14

SELECT A PROGRAMME

Select the programme that you wish to
use with the programme selector knob.

See the table of programmes for more infor-

mation about the various available program-
mes.

SELECTING SETTINGS AND OPTIONS

You can obtain a washing programme to
suit your particular wash by changing the

settings and options.

The machine will remember the settings and

options that you make for each programme and
will start with these (with a few exceptions –
temperatures above 60°C and Delayed start)
the next time you select the programme con-
cerned. Of course, you can then make a further
change if you wish.

Temperature

Set the temperature by indexing forward with
the

button. The selected temperature is

indicated in the display as you index forward.

You can select temperatures between 30°C

and 95°C or

(

if set for Fahrenheit).

denotes that the wash temperature will

be the same as that of the incoming water.

For certain programmes, it is not possible to

select a temperature higher than 40°C; see the
table.

Spin speed/No Spin/No Drain

Select the spin speed by indexing forward with
the

button. The selected speed is indica-

ted in the display as you index forward.

You can select speeds from 400-1600 revolu-

tions/minute, No Spin ( ) or No Spin/No
Drain (

For certain programmes, it is not possible to

select a spin speed higher than 800 revolutions/
minute; see the table.

Spinning at 400-800 revolutions/minute al-

ways means a short spin. Spinning at 1000 re-
volutions/minute or higher always means a long
spin.

No Spin ( ) means that the programme

will be executed without spins and will end with
draining.

No Spin/No Drain (

) means that

the programme will be executed without spins
and will end with the final rinsing water re-
maining in the machine. The wash will then
remain floating in the final rinsing water and
will not become creased. Once the programme
is complete, you can then select one or other of
the Spin or Drain programmes or press the door
opening button to empty the rinsing water from
the machine.

Delayed start

Set the number of hours by which the start will
be delayed by indexing forward with the
button. The selected time is indicated in the
display as you index forward.

A delay of 5 hours thus means that the mach-

ine will start the programme 5 hours after pres-
sing the start button.

You can select a delay of between 1 and 24

hours.

denotes that the option is disconnected

and that the programme will start immediately
as usual.