Check ing the wa ter level 48, Checking the water level, Solving problems – Miele G848 User Manual
Page 48
Checking the water level
If the water pressure is less than 15 psi,
not enough water will flow into the wash
cabinet.
^ To check the water level, open the
water valve completely and run the
“Rinse & Hold” program once (with-
out dishes), to bring water into the
system.
^ Run, the “Rinse & Hold” program
again. After approximately 3 minutes,
open the door and remove the lower
basket from the machine.
The water level is correct when dimen-
sions
“X”
is at least 1/8” (4 mm).
If it measures less, the water intake time
must be increased (see the following
page).
Solving problems
48
See also other documents in the category Miele Dishwashers:
- G 1262 (60 pages)
- G 2732 (76 pages)
- G 1202 (60 pages)
- G 2872 (80 pages)
- G 5935 SCi XXL (2 pages)
- G643SCVI (52 pages)
- G 5970 (84 pages)
- INSPIRA SERIES G 2140 (52 pages)
- HG01 (36 pages)
- ADVANTA G 2180 (56 pages)
- OPTIMA SERIES G 2430 (60 pages)
- NOVOTRONIC G 841 SC PLUS (48 pages)
- G 4500 (56 pages)
- G 2020 (52 pages)
- G658SCVI (52 pages)
- G 5795 (84 pages)
- G 5575 (72 pages)
- G1470 (60 pages)
- G 2630 SCi (72 pages)
- Platinum G892us (52 pages)
- 05 620 661 (36 pages)
- ESS 3060-10 (16 pages)
- G892 (52 pages)
- G 2150 (52 pages)
- G 5875 (76 pages)
- NOVOTRONIC G 842 SC PLUS (48 pages)
- G 2670 SC (76 pages)
- LaPerla G 2830 SCi (80 pages)
- G 5515 (68 pages)
- G 1182 (56 pages)
- G 7856 (56 pages)
- G 2180 (56 pages)
- G 4570 (60 pages)
- TOUCHTRONIC PREMIER PLUS HG01 (56 pages)
- G 2183 (56 pages)
- EXCELLA G 2630 SCI (72 pages)
- G 2472 (60 pages)
- G 5910 (86 pages)
- G 2832 (80 pages)
- NOVOTRONIC G 851 SC PLUS (52 pages)
- NOVOTRONIC G 856 SC ELITE (52 pages)
- INSPIRA G 2140 (52 pages)
- G 5815 (72 pages)
- G2142 (60 pages)