beautypg.com

Operation, Connecting other audio/visual sources, Setting up audio – Motorola DCP501 User Manual

Page 3

background image

DCP501 3

DCP501 User Guide Addendum

Connecting Other Audio/Visual Sources

Page 39 — Change the heading to read Connecting Other Audio/Video Sources and change the
text on the page to read as follows:

You can connect an alternate audio/video source such as another DVD player by following the
diagram.

If you wish to use the digital audio output from a DVD player to the DCP501, you must assign
either the Optical1 or Coaxial digital audio input to the corresponding DCP501 video input
source by using the INPUT SETUP screens. If the DVD player is connected to the

VIDEO

2

inputs

on the front panel, the DCP501 automatically uses the

OPTICAL

2

digital audio input over the

analog input if it is available. See the “Operations” section for information on using the INPUT
SETUP screens.

Before connecting the DVD player, check the manual supplied with the DVD player for the

manufacturer’s installation guidelines.

Operation

Setting Up Audio

Page 46 — Change the first paragraph to read as follows:

This section includes information about setting up speakers and selecting audio inputs. During
playback from an external source such as a VCR, the DCP501 automatically selects which audio
input to use. If the audio input is digital, always use a digital input. Once a digital input is
assigned to a particular source, the DCP501 always uses the assigned digital audio input
instead of the analog audio input if both are present for the same source. You must select
various input sources from the INPUT SETUP menu so the DCP501 knows which digital inputs
are assigned. The DCP501 display shows the current audio input used by the selected source:

O P T 1

,

O P T 2

,

C O A X

, or

A N A L O G

. For digital audio inputs only, the DCP501 turns on an

icon to distinguish the digital input type:

P C M

,

D T S

, or

D D I G I T A L

.

Input Setup

Page 48 — Change step 7 to read as follows:

1

During playback from one of the external sources, the DCP501 automatically selects which
audio input to use. The DCP501 defaults to a digital audio input if one is present. You must
select various input sources from the INPUT SETUP menu so the DCP501 knows which
digital inputs are assigned. The DCP501 display shows the current audio input used by the
selected source:

O P T 1

,

C O A X

, or

A N A L O G

. For digital audio inputs only, the DCP501

turns on an icon to distinguish the digital input type,

P C M

,

d t s

, or

D D I G I T A L

.

Subwoofer and Speakers

Page 49 — Change the first paragraph to read as follows:

This option defines whether a subwoofer speaker is connected to the

AUDIO

-

PREOUT

-

SUB

connector. If

N O

is selected, Speaker Size for all speakers defaults to

L A R G E

. If you do not

have a surround mode selected, you cannot make adjustments to the rear speakers. Similarly, if
you do have a center speaker in the selected mode, you cannot make adjustments to the center
speaker. You must set the DCP501 to an audio mode that uses the center channel and/or the
surround channels in order to make adjustments to the center speaker and/or surround
speakers. The factory setting is

Y E S

. To change the subwoofer settings on the DCP501: