Miele GAS KM 81-2 - Manual (Page 38)

@ä
Conversion to alternative types of gas
Changing the main jet, (does not
apply to conversion to Natural Gas).
Using a 10 mm socket spanner, loosen
the main jet from their holders, using
a 13 mm spanner to counterhold.
Screw in the new main jet, once again
using the spanner to counterhold.
Changing the small jets
Natural gas
Liquid gas
The jets must be changed:
b Small jet with smaller orifice (e. g. for
liquid gas: 0.23)
c
Small jet with larger orifice (e. g. for
liquid gas: 0.52)
Using a small screwdriver, unscrew
both small jets in the gas fitting.
Pull the jets out with a pair of pliers.
Select the jets as shown in the table
and fit, reversing the procedure, and
secure.
@ä
Conversion to alternative types of gas
38