Miele GAS KM 81-2 - Manual (Page 37)

@ä
Conversion to alternative types of gas
The appliance is set up for natural gas
(NG).
When converting to alternative types of
gas, the components as listed below
have to be changed:
Remarks
Changes for LPG Propane:
jets, adjusting screws, regulator, Pro-
pane label.
Changes for LPG:
jets, adjusting screws, regulator,
LPG label.
Conversion
Turn off the gas mains (if this ap-
pliance has already been installed)
and turn off the mains electrical sup-
ply.
Remove the wok/pan support, the
large burner cap, the burner ring
and the large burner cap base.
With a cross-slotted screwdriver,
loosen the three screws.
Pull the controls for the gas burner
up and off.
Carefully raise the cooktop cover
slightly at the rear and pull forward.
Then carefully lift upwards and for-
wards. Ensure that the earth lead
which connects the cooktop and the
control panel is not damaged.
gas type burner jet
in
mm
adj.
screw of
control
regulator label
for
gas type
New
Zealand
Australia
NG
small
large
N° 34
2.0
0.40
0.88 alt.
0.90
N
o
1 NG
LPG
Propane
small
large
N° 7
1.12
0.23
0.52
N
o
2 LPG
LPG —
small
large
N° 7
1.12
0.23
0.52
N
o
2 LPG
@ä
Conversion to alternative types of gas
37