beautypg.com

Getting started – Philips Magnavox MDV434 User Manual

Page 14

background image

English

14

Selecting the colour system that
corresponds to your TV

This DVD Player is compatible with both
NTSC and PAL. In order for a DVD disc
to play on this Player, the colour system of
the Disc, the TV and the DVD Player
should match.

General

Audio

Video

Preference

TY Type

PAL

TV Display

Multi

Progressive

NTSC

Sharpness

Brightness

Contrast

- - Video Setup Page - -

1

Press

SYSTEM MENU.

2

Press 2 repeatedly to select {VIDEO
SETUP PAGE}.

3

Press

3 4 to highlight {TV TYPE}, then

press

2.

Getting Started

TIPS:

To return to the previous menu, press

1.

To remove the menu, press

SYSTEM MENU

.

4

Press

3 4 to highlight one of the options

below:

PAL – Select this if the connected TV is
PAL system. It will change the video signal
of a NTSC disc and output in PAL format.

NTSC – Select this if the connected TV
is NTSC system. It will change the video
signal of a PAL disc (VCD only) and
output in NTSC format.

Multi – Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will be
in accordance with the video signal of the
disc.

5

Select an item and press

OK.

Helpful Hints:

Before changing the current TV

Standard setting, ensure that your TV
supports the ‘selected TV Type’ system.

If there is no proper picture on

your TV, wait for 15 seconds for auto
recovery.

1. ENSURE THAT YOUR TV SYSTEM SUPPORTS
NTSC STANDARD.
2. IF THERE IS A DISTORTED PICTURE
DISPLAYED ON THE TV, WAIT 15 SECONDS
FOR AUTO RECOVER.

CANCEL

OK

CONFIRM AGAIN TO USE NEW TV TYPE SETTING.

CANCEL

OK

To deactivate Progressive manually

When the distorted picture still
appears on the TV,
it may be due to
the connected TV does not accept
progressive signals, and progressive is set
by mistake. You must reset the unit to
interlace format.

1

Turn off your TV progressive scan mode
or turn on to interlaced mode (refer to
your TV user manual.)

2

Press

OPEN/CLOSE on the DVD player

to open the disc tray.

3

Press

numeric keypad ‘1’ on the

remote control for few seconds.

The DVD blue background screen

will appear on the TV.

01-31 MDV434_LA_552a

02/03/05, 5:27 PM

14