Macsense Connectivity MIH-108 User Manual
Page 31
5. Can't connect to MIH-108 PalmRouter Elite via Web browser.
¥ Check out whether the IP address 192.168.1.1 is correct
or not.
¥ Check the network cable connection and LAN LED indicator on
the PalmRouter Elite.
¥ Check out the TCP/IP setup on your client. Type "winipcfg" on
DOS prompt under Windows 95 or open the TCP/IP control panel
on the Mac OS platform. The client should get an IP address of
192.168.1.x (where "x" is from 1 to 254.)
6. Firmware upgrade failed
¥ Escape from the upgrade window.
¥ Enter TFTP client again and you will be asked to execute the
upgrade program again. Repeat the upgrade procedure.
¥ After completing the upgrade procedure, unplug the power cable of
the PalmRouter Elite to reboot the system.
28