beautypg.com

Engine oil consumption – Mercedes-Benz 2002 C-Class User Manual

Page 145

background image

142

Engine oil level indicator

Technical

data

Instruments
and controls

Operation

Driving

Instrument

cluster display

Practical hints

Car care

Index

One of the following messages will subsequently appear
on the indicator:

“ENGINE OIL LEVEL – O.K.”
No oil needs to be added.

“ENGINE OIL LEVEL – ADD 1.0 QUART”
(Canada: 1.0 L)

“ENGINE OIL LEVEL – ADD 1.5 QUART”
(Canada: 1.5 L)

“ENGINE OIL LEVEL – ADD 2.0 QUART”
(Canada: 2.0 L)

See “Adding engine oil level”, on page 321 for
instructions on adding engine oil.

“ENGINE OIL LEVEL – REDUCE OIL LEVEL”
Do not overfill the engine.
Excessive oil must be siphoned or drained off. It could
cause damage to the engine and catalytic converter not
covered by the Mercedes-Benz Limited Warranty.

The “MEASURING NOT POSSIBLE” message will be
displayed if a proper oil level check cannot be
performed. The engine oil level check can be repeated
after a short while.

Notes:

See malfunction and warning messages on page 293
and page 303 if an engine oil level indicator appears on
the multifunction display when the engine is running.

The engine oil level cannot be checked while the engine
is running. The “ENGINE OIL LEVEL – NOT WHEN
ENGINE ON” message will appear.

Engine oil consumption

Engine oil consumption checks should only be made
after the break-in period. During the break-in period,
higher oil consumption may be noticed and is normal.
Frequent driving at high engine speeds results in
increased consumption.

OM_203.book

Seite 142 Donnerstag, 31. Mai 2001 11:57 11

This manual is related to the following products: