Miele CS1112 - Manual (Page 30)

Cut out
^ Make the countertop cut-out for the
desired number of appliances
according to the dimensions
drawings.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the left or right of the
combiset.
See also the "IMPORTANT
INSTALLATION SAFETY
INSTRUCTIONS".
^ Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be heat
resistant.
If during installation the seal around
the frame does not sit flush with the
countertop in the corners, the corner
radius, maximum
3 /
16
" (4 mm), can
be carefully filed down to fit.
Installation
30