Motorola GM950 - Manual (Page 3)

3
Audio Signals
English
Audio Signals
High pitched tone Medium pitched tone
Power Up - Radio self-test
OK
Power Up - Radio self-test
Fail
Button Error
Force Monitor
Keypad Acknowledge
Channel Busy Tone
Individual Call Alert
Individual Call Reminder
Group Call Alert
TOT Pre Alert
Monitor Alert
Scan Start
Priority Channel
Volume Select
H/W error - Button press
not accepted, tone
continues until valid
operation.
Display Icons (128-channel Only)
The icons which appear on the display are:
Scan Enabled
Monitor Enabled
Repeater Talkaround/Call Forward Enabled
External Alarm Enabled
Multicall 1-Address Selection Mode
Multicall 2-Status Selection Mode
Channel Selection Mode
Coded/Clear - Scrambled speech on
when icon lit.*
* Requires additional hardware option module.
Radio On/Off
To switch the radio on, press and release the ON/
OFF switch. The radio performs a self-test and a
high-pitched start-up tone will be heard.
If the error tone sounds, please contact the person
in charge of your radio system or your local
Motorola dealer.
To switch the radio off, press and hold the ON/OFF
switch for 2 seconds, then release.
S
Audio Signals/Display Icons /Radio On/Off
GM950 User Guide [EN] Page 3 Thursday, May 1, 1997 3:46 pm