MicroNet Technology RAIDBANK 5 - Manual (Page 24)

RAIDBank5 Owner’s Manual 24
4- RAID Manager Software
3.4 Button Backup
The Micronet RAIDBank5 RAID
subsystem supports user triggered
backup, triggered by the “Set/
Mute/Backup” button on the
back of the unit (see page 9 for
button location illustration.) Once
configured, the button will trigger
the configured task.
Your RAIDBank5 may arrive with
bundled backup software. If you’d
like to use the button to trigger
this software (or another program
of your choosing) make sure it
is installed before configuring
the button task. In the button
configuration screen, enter the program filename including full path (you may use the
button to locate the program) and the command line arguments as applicable in the “Program
Arguments” field.
PCClone EX utilizes a simple syntax for command line arguments. The argument “ /filesbackup:X”
(where “X” is the drive letter of the target drive) will launch a backup to the specified target volume.
4. Advanced Mode
Advanced mode provides interface to the more advanced features of the RAID subsystem.
In this mode there are five function tags in the function pane: Email Notification and Event
Settings, Advanced RAID Configuration, Firmware Control, RAID power and rebuild settings, and
Encryption Control.
4.1 Remote Notification
The RAIDBank5 features an SMTP
manager, and can send email
notifications for various RAIDBank5
conditions. The following subsections
discuss each attribute’s descriptions.
When all desired options are entered,
click
to finalize or to
undo selection.
4.1.1 SMTP Server IP address
The SMTP (Simple Mail Transport
Protocol) server is an external
server that relays your network’s
outgoing mail. Enter your
network’s SMTP server’s network IP address and port in these fields. If you do not know your
SMTP server’s IP address or server port, consult your network administrator.