MITSUBISHI ELECTRIC EX200U User Manual
Page 36
EN-36
FUNCTION
DESCRIPTION
Presentation Timer
Reminds the presenter to finish the presentation within a certain time
"Setting the presentation timer" on page 29
for details.
Language
Sets the language for the On-Screen Display (OSD) menus. See
for details.
Projector Position
See
"Choosing a location" on page 11
for details.
Auto Power Off
Allows the projector to turn off automatically if no input signal is
detected after a set period of time. See
for details.
Blank Timer
Sets the image blank time when the Blank feature is activated, once
elapsed the image will return to the screen. See
for details.
Panel Key Lock
Disables or enables all panel key functions except
POWER on the
projector and keys on the remote control. See
for details.
Timer Controller
Sets the auto-shutdown timer. The timer can be set to a value between
30 minutes and 12 hours.
Splash Screen
Allows you to select which logo screen will be displayed during
projector start-up. Three options are available: MITSUBISHI logo,
Black screen, or Blue screen.
Quick Cooling
Selecting On enables the function and the projector cooling time will be
shortened to a few seconds.
If you attempt to restart the projector right after the quick cooling
process, it may not be turned on successfully and will rerun its
cooling fans.
Audio Settings
See
"Adjusting the sound" on page 30
for details.
Menu Settings
Menu display time
Sets the length of time the OSD will remain active after your last key
press. The range is from 5 to 30 seconds in 5-second increments.
Menu position
Sets the On-Screen Display (OSD) menu position.
Lamp Settings
"Setting Lamp mode as Low" on page 40
for details.
"Resetting the lamp timer" on page 43
"Getting to know the lamp hour" on page 40
for details on how
the total lamp hour is calculated.
4. SYSTEM SE
TU
P: Basic menu
I
I
5. SYSTEM SE
TUP:
Advanced menu