Miele DA 219-3 - Manual (Page 41)

^ Pull the chimney apart slightly and
slide it over the chimney extension.
Do this carefully to prevent scatching
the two pieces.
^ Slide the chimney down aligning its
lower screw holes with those on the
side of retaining plate A.
^ Remove the protective shields.
If the chimney is not tall enough an
optional chimney extension can be
ordered. See "Installation /
Appliance dimensions".
^ Secure the chimney to reatining plate
A on both sides with two
3.9 x 7.5 mm screws.
^ Remove the protective foil from the
canopy.
^ Before using the appliance remove
the grease filter and remove the
protective foil from the filter frame.
Return the filter.
Installation
41