Servicing the lenticular screen and fresnel lens – MITSUBISHI ELECTRIC WS-48315 User Manual

Page 11

Text mode
Original mode

MODELS: WS-48315 / WS-55315 / WS-65315

Page 11

SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS

CAUTION:

Wear gloves when handling the Lenticular Screen and Fresnel Lens.
This prevents cuts and finger prints. Do not place Fresnel Lens in the sun.
This may cause fire and heat related injuries.

1a. Lenticular Screen and Fresnel Lens Removal

1. Remove the screen assembly as shown in the Cabinet Disassembly procedure.
2. Remove the Top, Bottom and Side Holder Screens..
3. Carefully lift the Lenticular Screen and Fresnel Lens combination from the Screen Frame Assembly.

Note: When separating the Lenticular Screen from the Fresnel Lens, use caution

while prying the Screen and Lens apart. Use a slot type screw driver, and
remove the pressure sensitive double sided tape.

WS-48315