beautypg.com

Operation (continued), Snooze – Memorex iWakeUp Mi4014 User Manual

Page 18

background image

17

OPERATION (CONTINUED)

Press the ALARM 1 1 or ALARM 2 2 button (which corresponds to the alarm that

was set) and the alarm will turn off and NOT be set for the next day. To set the

alarm for the next day, press any other buttons (except ALARM 1, ALARM 2 or

SNOOZE button).

NOTE: If set to iPod or Radio, while the alarm is on, if you press any button on the

unit (except the SNOOZE/SLEEP button or the Power button), the unit will change

from Alarm mode to normal Power On mode, so you can adjust any setting (i.e.,

volume level, radio frequency, etc.) as desired. Press the Power button to turn off

the unit if necessary. If set to Buzzer, while the alarm is on, if you press any button

on the unit, the unit will turn off.

SNOOZE

1

2

1

TO SHUT THE ALARM OFF

While the alarm is sounding, press the

SNOOZE/SLEEP button; the SNOOZE

indicator will appear in the display. Also,

"10" will appear in the display for five

seconds and then revert back to the

actual time. The alarm will turn back on

automatically ten minutes later.

SNOOZE

1

SNOOZE

To set the SNOOZE time to a time other

than 10 minutes, when “10” appears in the

display, press the SNOOZE/SLEEP button

again. Each press of the SNOOZE/SLEEP

button will increase the SNOOZE time by

five minutes (up to "60” for 60 minutes).

Once you stop pressing the button, the

display will show the SNOOZE time for five

seconds and then revert back to the actual

time. The alarm will turn back on according

to the SNOOZE time set.

SNOOZE

2

NOTE:

To cancel the SNOOZE function (the alarm will not turn back on), press the

ALARM 1 or ALARM 2 button (which corresponds to the alarm that was set);

the SNOOZE indicator will disappear from the display and the alarm will NOT

be set for the next day. To set the alarm for the next day, press any other

buttons (except ALARM 1, ALARM 2 or SNOOZE button).