Memorex iWakeUp Mi4014 - Manual (Page 15)

14
OPERATION (CONTINUED)
With the power off, press and hold
the TIME SET/DISPLAY button;
the time will blink.
SNOOZE
1
For your convenience, there is a DST
(Daylight Savings Time) switch
located on the rear of the unit. Slide
the switch to +1 to add an hour to the
actual time or slide the switch to -1 to
subtract an hour from the actual time.
1
Press the TIME SET/DISPLAY
button (or wait approx. 15
seconds) and the time will be set.
SNOOZE
3
TO SET OR RESET THE ACTUAL TIME
DST (DAYLIGHT SAVINGS TIME)
Within 15 seconds, press the MIN
(Minute) button 1 to set the
present minute and the HOUR
button 2 to set the present hour.
Make sure to set the correct
AM/PM setting.
SNOOZE 1 2
2