Double din head unit provision, Kit assembly – Metra Electronics 99-8214TB User Manual

Page 7

Slide the aftermarket radio unit into
the factory brackets and secure the
unit to the brackets using the
screws supplied with the head unit.
(Figure A)

REMOVE
CLOCK/HAZARD SWITCH
BRACKET ASSEMBLY

REAR VIEW OF RADIO HOUSING

RESTORE
CLOCK/HAZARD SWITCH
BRACKET ASSEMBLY

REAR VIEW OF
RADIO HOUSING

DOUBLE DIN TRIM PLATE

Secure the aftermarket radio unit
and factory bracket assembly into
the sub dash. (Figure B)

DOUBLE DIN HEAD UNIT PROVISION

Place the Double DIN trim plate into
the back of the radio housing, then
attach the clock/hazard switch brack-
et assembly using the (4) #6 x 3/8”
Phillips pan head screws. (Figure C)
WARNING:
DO NOT OVERTIGHTEN SCREWS.

99-8214

KIT ASSEMBLY

Continue to Final Assembly.

Clip the clock/hazard switch
assembly into the 99-8214 Radio
Housing Trim Panel. (Figure D)

This manual is related to the following products:

99-8214TG