Makita 5402NA - Manual (Page 13)

13
Rip fence (Guide rule)
The handy rip fence allows you to do extra-accurate straight
cuts. Simply slide the rip fence up snugly against the side of
the workpiece and secure it in position with the screw on the
front of the base. It also makes repeated cuts of uniform
width possible.
MAINTENANCE
CAUTION:
• Always be sure that the tool is switched off and
unplugged before attempting to perform inspection or
maintenance.
Adjusting for accuracy of 90
°°°° cut (vertical cut)
This adjustment has been made at the factory. But if it is off,
adjust the adjusting screw with the hex wrench while squar-
ing the blade with the base using a triangular rule, try square,
etc.
1. Clamp screw
2. Rip fence (Guide rule)
1
2
001976
1. Adjusting screw
2. Base
1. Trianglar rule
2. Hex wrench
1 2
001977
1
2
001978