Master Lock F-64TPG User Manual
Page 19

19
ACTIVATE FAULT FIND - Activates a multiple diagnostic test report. For installer's use
only. If accidentally enabled, press RESET to exit. Note: This selection only appears
with a Master I-FOB inserted in the Touchpad.
RESET SYSTEM TBL - System troubles display and sound at the Touchpad. Correct-
ing the trouble will clear most indications, however the following error codes will require
manual reset: E13; E19; E20 and E22. (See SYSTEM TROUBLE ERROR CODES for
a description of error codes). Note: This selection only appears with a Master I-FOB
inserted in the Touchpad.
ACTIVATE DIALER TEST – Allows a central station communication test to be initiated,
transmitting a Test Timer signal. For installer's use only. If accidentally enabled,
press RESET to exit. Note: This selection only appears with a Master I-FOB inserted
in the Touchpad.
ENTER LOG MENU – The Log Menu provides a list of logged events. DISPLAY
ALARM LOG displays the most recent alarm events. DISPLAY TOTAL LOG dis-
plays the most recent events of all types. DISPLAY FIRE LOG displays the most re-
cent fire events. DISPLAY OP/CL LOG displays the most recent openings and clos-
ings and DISPLAY SYSTEM LOG displays the most recent system events. Note:
This selection only appears with a Master I-FOB inserted in the Touchpad.
ACTIVATE PROGRAM - Activates the User Program Mode. See page 21 for more infor-
mation. Note: This feature is disabled while armed. Note: This selection only ap-
pears with a Master I-FOB inserted in the Touchpad.
T O U C H P AD M E N U M O D E
ACTIVATE
FAULT FIND
Y/N
RESET
SYSTEM TBL
Y/N
ACTIVATE
DIALER TEST
Y/N
ENTER LOG
MENU Y/N
ACTIVATE
PROGRAM Y/N
F-64TPG_OI320A.03_USER_2...
page 19
Friday, September 15, 2006 11:40
Composite