Marshall electronic V-R653SB-IMD - Manual (Page 7)

7
Compatible Input Formats
The following SDI standards are supported by the V-R653SB-IMD:
525i, 625i
1035i/60, 1035i/59.94
1080i/60, 1080i/59.94, 1080i/50
1080psF/24, 1080psF/23.98
720p/60, 720p/59.94, 720p/50
On-Screen Menu
STRUCTURE OVERVIEW
Marker 16:9 Off, 95%, 93%, 90%, 88%, 80%, 1.85:1, 2.35:1, 4:3, 14:9, 13:9
Marker 4:3 Off, 95%, 93%, 90%, 88%, 80%
Marker Backgrd Off, 50% Gray, Black
Marker Setup
Center Marker Off, On
Monochrome Off, On
Blue Only Off, On
Pixel to Pixel Off, On
Aspect Ratio 4:3, Scaled 4:3, 16:9, 16:9 Centered
Video Config
Curtain Color Blue, Red, Green, White, Black
CTemp/Gamma 55K, 65K, 93K, Linear
Red Offset 0-100
Green Offset 0-100
Blue Offset 0-100
Red Gain 0-100
Green Gain 0-100
Color Config
Blue Gain 0-100
Gray Levels RGB = 000 - 255
Function 1
Marker, Center Marker, Marker Background, IMD, Time Code, OSD Tally, Audio Monitor, Aspect Ratio, Pixel to
Pixel, CTemp/Gamma, Blue Only, Monochrome
Function 2
Marker, Center Marker, Marker Background, IMD, Time Code, OSD Tally, Audio Monitor, Aspect Ratio, Pixel to
Pixel, CTemp/Gamma, Blue Only, Monochrome
Save Defaults Back, Save, Mfg
Load Config Mfg, User 1, User 2, User 3, User 4, User 5, User 6
Save Config User 1, User 2, User 3, User 4, User 5, User 6
Main Board (Main board firmware version number displayed)
Keypad (Keypad firmware version number displayed)
System Config
CPLD (CPLD firmware version number displayed)
Deint. Mode Auto, Motion Adaptive, Field to Frame, Interpolate(Bob), Static Mesh(Weave)
Film Mode Auto, 2:2 only, 3:2 only
Film Indicator Off, On
Deinterlacer
Motion Display Off, Noise, Motion
IMD State Off, On
Status Display Off, On
OSD Tally Off, RGY, RG, GR, IMD
LED Tally Off, On
Anc. Time Code Off, LTC, VITC
OSD Config
Audio Monitor Off, On
IMD Protocol MEI, Image Video, TSL v4.0, MEI-Image Video
IMD ID # 000-255
IMD Group # 001-254
IMD Name (S/N) User Defined (16 chars max.)
IMD Baud Rate 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
IMD Fixed Align Center, Right, Left
IMD Fixed Color Red, Green, Yellow
IMD Fixed Str User Defined (16 chars max.)
Tally Source Standard, Image Video HW, Image Video 422, Standard + IV422, TSL/MEI 422
IMD Config
IMD Tally Mode T1, T2, T1T2, T2T1, T1-, T2-, T1T2-, T2T1-
Serial Chars Rx, Tx
Serial Errors P, F, O
Packets Rec, Exe
Packet Errors CRC, Err
Last Command R, E
Main
Service
Software State 000:000 1010111