Starting from a desired time count, Random (audio cd), Marker setup screen – MITSUBISHI ELECTRIC DD-6050 User Manual
Page 17
– 17 –
EN
1L25
STARTING FROM A DESIRED
TIME COUNT
1
Press the SEARCH MODE button repeatedly
during playback.
2
Press the Numeric buttons to set the desired
time count.
¡
Example: 1 hour, 23 minutes and
30 seconds
1
2
3
3
0
Notes
¡
In the case of DVD, Time Search in Title is
effective, but Time Search in Chapter is ineffective.
¡
In the case of CD, Time Search in Track is effective,
but Time Search in the entire disc is ineffective.
¡
Playback from a desired time count is not available
with some discs or if the unit is in stop mode.
¡
If wrong numbers are entered, press the CLEAR
button and re-enter the correct numbers.
¡
When there is no need to enter a number, "0" appears
automatically. For example, "0:0_:_ _" appears in
the Time Search display if the total time of the disc
is less than 10 minutes.
CD
DVD-V
:
:
1 : 23 : 45
TOTAL
RANDOM (Audio CD)
1
Press the MODE button in stop mode.
¡
The program setting menu screen will appear.
2
Press the MODE button again.
CD
PLAY
RANDOM PROGRAM
- - no indication - -
CD[AUDIO]
TOTAL 0:45:55
RANDOM
3
Press the PLAY button. Random playback
will then start.
Note
¡
Program playback is not available during random
playback.
MARKER SETUP SCREEN
Use markers to memorize your favorite places on a
disc.
1
Press the SEARCH MODE button repeatedly
during playback.
¡
The display screen and Markers will appear on the
TV screen.
2
Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9
or 10 and ensure that “- : - - : - -” appears in
the display.
3
When reaches the desired point, press the
ENTER button.
¡
The Title or Track and elapsed playing time will
appear in the TV screen.
4
To return to the Marker later, press the
SEARCH MODE button repeatedly during
playback, and s or B to choose the desired
marker, then press the ENTER button.
CD
DVD-V
Notes
¡
Opening the disc tray, turning off the power, or
selecting AC at step 2 and pressing the ENTER
button will erase all Markers.
¡
To clear a marker, using s or B, position the cursor
on to the marker number to be cleared and press
CLEAR button.
¡
You can mark up to 10 points.
5
Press the SEARCH MODE button or the
RETURN button to exit.
E5931UD_2çZ.qxp 04.2.25 19:29 Page 17