MITSUBISHI ELECTRIC DD-6050 - Manual (Page 14)

PLAYING A DVD VIDEO
OR AN AUDIO CD
Getting started
Turn on the power of the TV, amplifier and any other
components which are connected to the DVD player.
(Change the input system to suit the DVD player, and
check that the sound volume is correct.)
1 Press the POWER button.
¡ The power will turn on.
2 Press the OPEN/CLOSE button.
¡ The disc loading tray will open.
3 Place a disc into the tray.
¡ Make sure the disc is sitting properly in the correct
recess, with the label side up. Discs that are irregularly
shaped, contain a scratch protection film, or have any
type of sticker or adhesive label should not be inserted.
4 Press the PLAY button.
¡ The tray will close automatically, and playback will
then start from the first chapter or track of the disc. You
need to press the PLAY button only when the tray has
been closed by pressing the OPEN/CLOSE button.
¡ When you playback a DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to “USING THE TITLE MENU.”
5 Press the STOP button to stop play.
Notes
¡ A “prohibited icon” may appear at
the top-right on the TV screen
during operation, warning that a
prohibited operation has been
encountered by the DVD player
or the disc.
¡ If a disc is dirty or has scratches, the pictures may
appear distorted and the playback operation may
stop. In such cases, clean the disc and unplug the
power cord and then plug it again before resuming
playback. Never attempt to play a cracked or broken
disc !
CD DVD-V
¡ With DVDs that use some titles for playback
program signals, playback may start from the second
title, or it may skip these titles.
¡ During the playback of a common two layered disc,
pictures may stop for a moment. This happens when
the 1st layer switches to the 2nd layer. This is not a
malfunction, and is commonly found on pre-recorded
discs.
¡ Operation may vary when you playback DVDs with
a disc menu. Refer to the manual accompanying the
disc for details.
PLAYING A DISC
USING THE DVD MENUS
Some DVDs contain their own menus, such as a
guidance menu which describes the contents of the
disc or a selection menu for sound, language and other
customized settings.
1 Press the MENU button.
¡ The DVD menu will appear.
2 Select the desired title.
¡ Press the Arrow buttons ( K / L /s/B) to change the
setting, and then press the ENTER button.
3 Playback will start from the selected title.
DVD-V
– 14 – EN
1L25
E5931UD_2çZ.qxp 04.2.25 6:00 PM Page 14