Mark Levinson N432 N431 - Manual (Page 14)

14
2. Power Button
Powers the Nº432/431 on and off when the power cord is
connected to the ~ac mains connector and an electrical outlet.
When the Nº432/431 is powered on, pressing and releasing
the power button disconnects power from the ~ac mains
connector
and powers the Nº432/431 off.
When the Nº432/431 is powered off, pressing and releasing
the power button connects power to the ~ac mains connector
and powers the Nº432/431 on. If the power save mode
switch
is set to on, the Nº432/431 enters sleep mode. If the
power save mode switch is set to off, the Nº432/431 enters
standby .
Note:
The Nº432/431 must be powered on with the power button to
respond to remote trigger commands.
3. Standby Button
Places the Nº432/431 into standby or sleep mode and takes
the Nº432/431 out of standby or sleep mode. When the
Nº432/431 is powered on, pressing and releasing the standby
button
places the Nº432/431 into standby or takes the
Nº432/431 out of standby, allowing it to remain warmed-up
to deliver an optimal performance at all times.
Pressing and holding the standby button places the Nº432/
431 into sleep mode. When the Nº432/431 is in sleep mode,
pressing and releasing the standby button takes the Nº432/
431 out of sleep mode. If the power save mode switch is set
to on, the Nº432/431 powers on into sleep mode. If the
power save mode switch
is set to off, the Nº432/431 enters
standby .