MTD 770-10278 993 - Manual (Page 21)

21
Model 993
Ref.
No.
Part No. Description Qty.
1 629-0071 Extension Cord 10 Ft. 1
2 710-0502A Hex L-wash Tt Scr 3/8-16 X 1.25 4
3 710-0607 Hwhd 5/16-18 X 1/2 Thd Roll Zn 3
4 731-0321-1 Belt Cover - Pierced 1
5 736-0264 Fl-wash .344 ID X .625 OD X .063 3
6 712-3006 Nut 1/4-20 GR B Hex 1
8 732-0705 Cable Control Wire 1
9 736-0173 Fl-Wash .28 ID x .74 OD x .063 1
10 736-0329 Lock Washer 1/4 1
11 07386 Wash .39 ID X 1.75 OD X .175 T 1
12 710-0191 Scr Hex Cap 3/8-24 X 1. Gd 8 1
13 710-0237 Scr Hex Cap 5/16-24 X .62 Gd 5 3
14 710-0459 Scr Hex Cap 3/8-24 X 1.5 Gd 5 1
15 710-1245 Hhcs 5/16-24 X 7/8 Gr 5 1
16 712-0116 Hex Ins L-nut 3/8 - 24 1
17 714-0118 Square Key 1/4 X 1.5 1
18 732-0303 Extension Spring .38 OD X 3.18 L 1
19 736-0169 L-wash 3/8 1
20 736-0217 Lock Washer 3/8 Heavy 1
21 736-0242 Bell Wash .345 ID X .88 OD X .060 4
22 737-0157 Grease - Sunaplex 781 - 1/10 1
23 738-0215A Shoulder Scr .498 Dia X 3.0 Lg 1
24 748-0234 Shldr Spcr .50 Dia X .14 Shldr 1
25 754-0131 3v Belt 35.5 Lg 1
26 756-0240 3.0 OD Flat Idler With Flange 1
27 756-0241B Dbl Engine Pulley 3.25 & 2.75 1
28 684-0123A Brkt Asm Cvr Belt 12 HP 1
29 784-5726 Brkt Idlr Dr 1
30 - Engine 1
Ref.
No.
Part No. Description Qty.
IMPORTANT: For a proper working machine, use Factory
Approved Parts.
V-BELTS are specially designed to engage and disengage
safely. A substitute (non OEM) V-Belt can be dangerous by
not disengaging completely