beautypg.com

Introduction, Fast ethernet (ioobase-x) cable specifications, The lan master™ tx8 hub – Milan Technology HB-E-TX-8 User Manual

Page 4

background image

LAN Master™ TX8

14

1

100BASE-TX 8-Port Hub

1. INTRODUCTION

This guide is intended for the system or network administrator
responsible for installing and monitoring a TRANSITION Networks
LAN Master™ TX-8 100BASE-TX 8-Port Hub. A working knowledge
of local area network (LAN) operations, including familiarity with
communications protocols used on interconnected LANs, is
assumed.

The LAN Master™ TX8 Hub

The LAN Master™ TX8 100BASE-TX 8-Port Hub (HB-E-TX-8) is a
Fast Ethernet repeater designed to meet IEEE 802.3u 100BASE-TX
standards.

LAN Master™ TX8 Hub Features

Eight RJ-45 100BASE-TX ports for Fast Ethernet connectivity

Port #8 provides LAN Master™ TX8-to-LAN Master™ TX8
MDI/MDI-X uplink option

19-inch rack mountable

Auto partitioning of ports with excessive collisions

Fully automatic preamble regeneration

Internal universal input power supply

FAST ETHERNET (IOOBASE-X)

CABLE SPECIFICATIONS

Due to the limited collision domain in 100BASE-X, use the shortest
cables possible to make a connection between any two devices.
Where collisions are not a consideration (full duplex), longer
cable may be possible.

Effective cable distances are determined by ambient RF noise and
by signal loss in the cable. Since fiber has low signal loss/meter
and invulnerability to RF noise, fiber is the preferred medium for
extending distances.

100BASE-FX Cable and Connector Specifications

The physical characteristics of the 100BASE-FX cable must meet or
exceed IEEE 802.3 100BASE-FX specifications.

100BASE-FX CABLE SPECIFICATIONS

Fiber Optic Cable Recommended:

62.5 / 125 µm multimode fiber

Optional:

100 / 140 µm multimode fiber

85 / 125 µm multimode fiber
50 / 125 µm multimode fiber

Fiber Optic Transmitter Power:

Average power:

-19.0 dBm

Fiber Optic Receiver Sensitivity:

Average sensitivity:

-33.5 dBm

Bit error rate:

10

-10

Maximum Cable Distance:

2000 meters (6500 feet)

100BASE-FX CONNECTOR CHARACTERISTICS:
The 100BASE-FX connectors are standard ST connectors.

SC connectors are available.