Memorex MC7100 - Manual (Page 13)

12
OPERATION (CONTINUED)
Press the POWER button 1 to turn the
unit on and insert a CD as described on
page 9. Press the Play/Pause (
®p )/CD
button 2 to select CD; the total number of
tracks and playing time will appear in the
display, then playback will start automati-
cally. Press the STOP (
■ )/CLOCK SET
BUTTON 3 to stop automatic playback.
3
1
1
2
1
Press the PROG./CH SAVE button 1
once; “P 01” (program number), “00”
track number and the Program indicator
will appear in the display. Select the first
track to be played back using the
Tune/Skip/Search/Min
n 2 or Hr o 3
button, then press the PROG./CH SAVE
button
1 again. Repeat this step to pro-
gram additional tracks, up to 20 tracks.
2
3
1
2
TO PROGRAM THE MEMORY (UP TO 20 TRACKS)
Press the PLAY/PAUSE ( ®p )/CD but-
ton to begin playback. The unit will play
all the tracks in the order you pro-
grammed them.
2 1
1
3
Adjust the VOLUME buttons 1 as desired.
When the disc is through playing, it will stop.
Press the STOP (
■ )/CLOCK SET BUTTON
2 to stop the disc before it is finished.
1 1
2
4
NOTES:
•
To skip forward or backward through the programs, press the
Tune/Skip/Search/Min
n or Hr o button. When the disc is through playing, it
will stop.
• Programming is the ability to preselect the order in which a series of tracks will
be played.
FAQ: How do I clear the memory and exit the program playback mode?
While in the program stop mode, press the STOP ( ■ )/CLOCK SET
BUTTON to clear the program and exit the program mode. The display
will show the total tracks and time of the disc again.