Meade Instruments CV-4 8 x 30 - Manual (Page 11)

CV-4 is waterproof and seals in the electronics, batteries, memory card and USB
port. However, this means that you will need to install the batteries and SD or MMC
card, and
carefully seal the compartment to ensure waterproofing.
Seal Your Camera
12
Insert Batteries,
Install SD or MMC Card and
Seal waterproof compartment 1. To open the battery compartment:
Press the tab down and push the
battery compartment lid forward to
open.
2. Insert 2 AAA 1.5v (user-supplied)
batteries into the compartment,
noting the correct polarity as
illustrated inside the compartment.
3. To load or eject a SD/MMC memory
card: Press the card in topside up,
and release when you hear a click.
4. To seal the compartment, close the
lid and slide the tab up. The tab
must be in the up position for the
compartment to be waterproofed.
If you want to... Do this...
Slide tab
Note: If you do not press any of
the buttons, the camera will
automatically shut off after 10
minutes.