Metz 28 CS-2 - Manual (Page 2)

Foreword
Congratulations on purchasing our
flash 28 CS-2 digital and thank you for the confi-
dence in our products.
The following pages give useful instructions for
proper operation of the flash unit and a survey of
all its sophisticated functions.
Please read these operating instructions carefully,
even if one or the other point may not appear to
be very insteresting at first sight. Although our de-
signers have attached great importance to making
the operation of the flash unit as simple as pos-
sible, the cameras with which it will eventually be
used often offer a great diversity of capabilities.
Please also fold open the illustrated page at the
end of these instructions.
We wish you great pleasure with this new flash
unit.
Contents:
1. Safety instructions 88
2. Preparations 89
2.1 Power supply 89
2.2 Loading and replacing the batteries 89
2.3 Mounting / Removing the flash unit 90
2.4 Switching the flash unit on and off 90
3. Flash coverage and reflector attachments 90
4. Slave mode
91
5. Switch on and shoot in EASY mode 91
6. Slave modes (SL) 93
6.1 Slave mode without preflash suppression 94
6.2 Slave mode with preflash suppression
95
6.3 Adapted slave mode 95
7. Settings for camera and flash unit 96
7.1 Cameras where operating mode, ISO
and aperture can be set 97
7.2 Cameras where operating mode, ISO
and aperture cannot be set 98
86
ķ
703 47 0165.A1 Inh. 03.08.2004 7:38 Uhr Seite 86