Memorex MM1520 - Manual (Page 5)

10．If the monitor cannot work normally, especially there is abnormal sound or burnt flavor in side
it ,you should turn off the power supply immediately and contact with the supplier。
11．High temperature can cause trouble, so do not use the monitor in the place there is sunshine
The monitor should be putted in the place being distant to the heater, the stove fireplace or
other heat source.
12．.Disconnect the plug if you will not use the monitor for a long period of time.
13．Disconnect the plug before removing the monitor。
14．.AC power supply outlet should be putted near to the monitor, and in your reach, so that you
can cut off the power supply in time。
Operation instructions：
Connect with the computer：
一、 Do turn off the pc and power supply when you connect system。
二、 Please operate according to the following procedures when you connect monitor with your
system。
1． Connect the power cord for your monitor to the power port on the back of the monitor
plug the power cord for the monitor into a nearby outlet.。
2． .Connect your signal cable to the video port on your computer, fasten it,。
3． Press the power switch and open the monitor。
.Following is OSD operation of figure
Function for press. Led for power switch for power
function for press Led for power switch for power . .
5