Maxtor Computer Drive - Manual (Page 25)

Installation
Maxtor DiamondMax 8S 40GB SATA 4-2
4.2 UNPACKING INSTRUCTIONS
1. Open the shipping container and remove the packing assembly that
contains the drive.
2. Remove the drive from the packing assembly.
3. When you are ready to install the drive, remove it from the ESD bag.
Figure 4-2 Single Pack Shipping Container
CAUTION:
The maximum limits for physical shock can be exceeded if the
drive is not handled properly. Special care should be
taken not to bump or drop the drive. It is highly recommended
that Maxtor DiamondMax 8 SATA drives are not stacked or
placed on any hard surface after they are unpacked. Such handling
could cause media damage.
CAUTION:
During shipment and handling, the antistatic electrostatic dis-
charge (ESD) bag prevents electronic component
damage due to electrostatic discharge. To avoid accidental dam-
age to the drive, do not use a sharp instrument to open the ESD
bag and do not touch PCB components. Save the packing mate-
rials for possible future use.