GoVideo DV2150 - Manual (Page 29)

29
Audio Settings
Digital Out
Sets the format of the digital audio signal
from the rear panel Coaxial jack.
1
In DVD Stop mode, press SETUP.
2
Select Audio > Digital Out.
3
Choose from the following:
Bitstream - Select if the DVD+VCR is
connected to a 5.1 channel amplifi er/
receiver with a Dolby Digital or DTS
decoder.
LPCM – Select if the DVD+VCR is con-
nected to a 2-channel (stereo) digital
amplifi er.
Dynamic Range
Compresses the dynamic range of the
audio output (the difference between the
loudest and quietest passages) during
DVD playback.
1
In DVD Stop mode, press SETUP.
2
Select Audio > Dynamic Range.
3
Use the  buttons to move the
Dynamic Range slider from OFF (no
compression) to FULL (maximum
compression).