Graco 8480 User Manual

Page 17

Text mode
Original mode

6. To adjust the position of

the harness straps, remove
your child from the car
seat in order to make the
adjustment. Look behind
the car seat to locate the
ends of the straps as they
loop around the metal
junction plate.
Remove the ends of the
two shoulder straps from
the junction plate

7. From the front of the car

seat, pull the strap ends
through the slots

and

reinsert them through the
appropriate slots as deter-
mined in step 5 above.

8. Behind the car seat,

reassemble the straps
onto the metal junction
plate. Check that straps
are completely within
the slots as shown