Grizzly Heavy-Duty Bar Clamp Heads H8027 User Manual

Model h8027 heavy-duty bar clamp heads, Instruction sheet

MODEL H8027

Heavy-Duty Bar Clamp Heads

INSTRUCTION SHEET

WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE

OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.

#TS8466 PRINTED IN CHINA

If you need help with your new bar clamp heads, call our
Tech Support at: (570) 546-9663.

��

��
��

Figure 1. Wood dimensions.

Figure 2. Drilled hole dimensions.

Figure 3. Bar clamp heads mounted.

To assemble:

1. Select a dry, straight wooden board of the dimensions

shown in

Figure 1.

2. Drill as many

⁄

in. holes as desired along the length of

the board, at least 3 in. apart and

⁄

in. on center from

the top of the board (see

Figure 2)

Note: Make sure holes are at least 3 in. from the
ends of the board so that the board will not split when
stressed.

3. Using the hex bolts and nuts provided, mount the two

bar clamp heads (see

Figure 3).