Programming with code search – GE RM91902 User Manual

Page 9

Text mode
Original mode

Programming With Code Search

If your TV, VCR, or Cable Box does not respond
after you have tried all the codes for your
brand, or if your brand is not listed, try search-
ing for your code by following the steps
below.

1. Turn on the device

you wish to program.

2. Press and hold

SETUP until the
INDICATOR LIGHT
lights, then release
SETUP.

3. Press and release the

device button for the
device you are
programming (TV, VCR,
CAB/SAT, DVD/AUX).
The INDICATOR
LIGHT will blink once.
For AUX, press AUX
then the device button
you are assigning to AUX.

4. Press and release POWER

until your device turns
off. Important: You
may have to press
POWER up to 200 times.

5. When your device turns

off, press the ENTER
button, the INDICATOR
LIGHT will go off.

BLINK

94902 Revised Size 2/25/02 4:03 PM Page 9