Programming for vcr – GE RM91902 User Manual

Page 6

Text mode
Original mode

Programming For VCR

1. Manually turn

on the VCR.

2. Press and hold

the SETUP
button until the
INDICATOR LIGHT
lights, then release
the SETUP
button.

3. Press and release

the VCR button (the
INDICATOR LIGHT
will blink then remain
lit).

4. Find the three digit

code for your VCR
in the code list in
the back of this book
and enter it using
the Number Buttons.
After your code is
entered, the INDICATOR
LIGHT will turn off.

5. Aim the remote at your

VCR and press the
POWER button. Your
VCR should turn off.

Note: If your VCR does not respond, try all the
codes for your brand. If the codes do not work,
or your brand is not listed, try the Code Search
method on page 8.

6. With your VCR on, press

CHANNEL UP. If the VCR
responds, no further
programming is
required.

7. Enter your code

here for easy
reference.

BLINK

OFF

VCR CODE

94902 Revised Size 2/25/02 4:03 PM Page 6