GE Security DVMRe Triplex 0150-0193G - Manual (Page 31)

0150-0193G 31 DVMRe Triplex
3.7 The Main Menu
Main Menu Overview
The Main menu contains the majority of programmable options for the DVMRe Triplex. Each item in the
Main menu is described in detail in this section of the manual.
Main menu items appear in this section in the same order they appear in the menu.
3.8 Time/Date
Use this menu to specify:
• Which monitors will display the time and date.
• The time format: 12 or 24 hours.
• The date format: MM/DD/YY, YY/MM/DD, or DD/MM/YY.
• The time and date.
• Whether the unit’s clock is a master or slave.
• Set Regional Daylight Savings Time.
• Setup clock synchronization between Triplex and Network Server.
q Main Menu → Time/Date → Time / Date Display
Use this menu to specify if the time and date will be displayed on:
• Monitor-A.
• Monitor-B.
• Both Monitors.
• Not Displayed
Rotate the Jog to navigate, then rotate the Shuttle to change the values.
Save changes and exit the menu: Select [OK], then press the Enter button.
Exit the menu without making changes: Press the Menu button, or select [CANCEL], then press
the Enter button.
q Main Menu → Time/Date → Set Time Format
Rotate the Jog to set the desired time format. Select from either:
• 12 Hour
• 24 Hour
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Time/Date Display
Monitor A :
Monitor B : ON
[CANCEL] [OK]
ON
Time Format Setup
Select Format
12 HOUR
Time/Date Display
Set Time Format
Set Date Format
Set Time
Set Date
Set Master/Slave
Set Region
Network Time Setup