GE ZV830 - Manual (Page 8)

8
Questions?
Use this
problem
solver! PROBLEM POSSIBLE CAUSE
FAN AUTOMATICALLY • The hood fan will turn on automatically or automatically increase in
TURNS ON OR INCREASES speed if cooking temperatures become too hot. The fan will turn off
IN SPEED AND CAN NOT automatically or decrease in speed when temperatures cool to an
BE TURNED OFF OR appropriate level. Fan will also turn on automatically when the hood
LOWERED IN SPEED electronics are too hot.
NOTE: When the automatic fan feature is on, you can set the fan to
a higher setting but not to a lower setting or off.
FAN DOES NOT • A fuse may be blown or a circuit breaker tripped. Replace fuse or
OPERATE WHEN reset circuit breaker.
TURNED ON
• The power disconnect switch inside the hood may be switched off.
Remove the metal grease filter and the charcoal filter (if present) and
flip the switch on.
The Problem Solver
Chimney Hood
LOCATE ON/OFF SWITCH.
1. Press in to release and lower the filter cover panel at the front.
2. Push the filter latch toward the opening and pull downward
to remove.
3. Remove the charcoal filter, if present.
4. Reach into the motor compartment and locate the ON/OFF switch
at the front of the opening.
5. Press switch to ON position.
NOTE: If the hood blower needs to be removed for service, use the
disconnect switch for your safety. Press the switch to the OFF position.
Push-button
switch
(horizontal
view from
inside
opening)
Filter
latch
Press corners
to unlock