GIGABYTE GA-P31-ES3G User Manual

Page 64

GA-P31-ES3G Motherboard

- 64 -

Step 6:
Select Save & Exit Setup and then press to save settings to CMOS and exit BIOS Setup. The
procedure is complete after the system restarts.

Press to load BIOS defaults

Step 4:
Press and then to exit Q-Flash and reboot the system. As the system boots, you should
see the new BIOS version is present on the POST screen.

Step 5:
During the POST, press to enter BIOS Setup. Select Load Optimized Defaults and press
to load BIOS defaults. System will re-detect all peripherals devices after a BIOS update, so we
recommend that you reload BIOS defaults.

Standard CMOS Features

Advanced BIOS Features

Integrated Peripherals

Power Management Setup

PnP/PCI Configurations

PC Health Status

MB Intelligent Tweaker(M.I.T.)

Load Fail-Safe Defaults

Load Optimized Defaults

Set Supervisor Password

Set User Password

Save & Exit Setup

Exit Without Saving

ESC: Quit

KLJI: Select Item

F11: Save CMOS to BIOS

F8: Q-Flash

F10: Save & Exit Setup

F12: Load CMOS from BIOS

Time, Date, Hard Disk Type...