GIGABYTE GA-P31-ES3G - Manual (Page 32)

GA-P31-ES3G Motherboard - 32 -
2-1 Startup Screen
The following screens may appear when the computer boots.
A. The LOGO Screen (Default)
B. The POST Screen
Motherboard Model
BIOS Version
Function Keys
Award Modular BIOS v6.00PG, An Energy Star Ally
Copyright (C) 1984-2008, Award Software, Inc.
Intel P31 BIOS for P31-ES3G E4
.
.
.
.
: BIOS Setup : XpressRecovery2 : Boot Menu : Qflash
07/18/2008-P31-ICH7-6A89OG0DC-00
Function Keys:
: POST Screen
Press the key to show the BIOS POST screen. To show the BIOS POST screen at system
startup, refer to the instructions on the Full Screen LOGO Show item on page 38.
: BIOS Setup/Q-Flash
Press the key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup.
: Xpress Recovery2
If you have ever entered Xpress Recovery2 to back up hard drive data using the motherboard
driver disk, the key can be used for subsequent access to XpressRecovery2 during the
POST. For more information, refer to Chapter 4, "Xpress Recovery2."
: Boot Menu
Boot Menu allows you to set the first boot device without entering BIOS Setup. In Boot Menu, use
the up arrow key < > or the down arrow key< > to select the first boot device, then press
to accept. To exit Boot Menu, press . The system will directly boot from the device
configured in Boot Menu.
Note: The setting in Boot Menu is effective for one time only. After system restart, the device boot
order will still be based on BIOS Setup settings. You can access Boot Menu again to change the first
boot device setting as needed.
: Q-Flash
Press the key to access the Q-Flash utility directly without having to enter BIOS Setup first.
:POST Screen :BIOS Setup/Q-Flash :XpressRecovery2 :Boot Menu :Qflash
Function Keys